Hit Lazer To Goals

About Hit Lazer To Goals

In Hit Lazer To Goals, you adjust a set of mirrors to direct one or more laser beams from their sources to the corresponding goal tiles. The beam travels in straight lines, reflects off mirrors at the angle of incidence, and stops if it hits a wall or obstacle. By rotating mirrors, you change the beam's path. Some levels also allow you to reposition mirrors within the grid. The objective is to light up every goal.

The challenge lies in planning routes that avoid obstacles and use the available mirrors efficiently. Early levels introduce basic 45-degree reflections, but soon you must handle multiple beams, tight spaces, and goals that require simultaneous activation. Because mirrors can only be rotated in fixed increments, even a small misalignment sends the beam off course. The difficulty ramps steadily, rewarding careful observation and logical thinking over guessing.

Tips to win

• Trace the beam backwards from the goal tile to determine required mirror positions and angles.
• Use 45-degree mirror rotations to create right-angle turns; a beam hitting a mirror at 45 degrees exits at 90 degrees.
• If multiple beams share a mirror, adjust one path at a time and verify all goals after each change.